Sciact
  • EN
  • RU

Adsorption Removal of Mo(VI) from an Aqueous Solution by Alumina with the Subsequent Regeneration of the Adsorbent Научная публикация

Журнал International Journal of Molecular Sciences
ISSN: 1661-6596 , E-ISSN: 1422-0067
Вых. Данные Год: 2023, Том: 24, Номер: 10, Номер статьи : 8700, Страниц : DOI: 10.3390/ijms24108700
Авторы Kurmysheva Alexandra Yu. 1 , Vedenyapina Marina D. 2 , Kulaishin Stanislav A. 2 , Podrabinnik Pavel 3,1 , Pinargote Nestor Washington Solís 1 , Smirnov Anton 1 , Metel Alexander S. 3 , Bartolomé José F. 4 , Grigoriev Sergey N. 3,1
Организации
1 Laboratory of Electric Current Assisted Sintering Technologies, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia
2 N. D. Zelinsky Institute of Organic Chemistry, Russian Academy of Sciences, Leninsky Prospect 47, 119991 Moscow, Russia
3 Department of High-Efficiency Machining Technologies, Moscow State University of Technology “STANKIN”, Vadkovsky per. 1, 127055 Moscow, Russia
4 Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), c/Sor Juna Inés de la Cruz, 3, Cantoblanco, 28049 Madrid, Spain

Реферат: Industrial wastewater is the main source of an excessive amount of molybdenum (Mo) in natural ecosystems. It is necessary to remove Mo from wastewater before it is discharged into the environment. Molybdate ion(VI) is the most common form of Mo in natural reservoirs and industrial wastewater. In this work, the sorption removal of Mo(VI) from an aqueous medium was evaluated using aluminum oxide. The influence of such factors as the pH of the solution and the temperature was evaluated. Three adsorption isotherms, namely, Langmuir, Freundlich and Temkin, were used to describe the experimental results. It was found that the pseudo-first order kinetic model better fits the kinetic data of the adsorption process, and the maximum Mo(VI) adsorption capacity was 31 mg/g at 25 °C and pH 4. The thermodynamic parameters indicated that the process of Mo(VI) adsorption on Al2O3 was exothermic and spontaneous. It was shown that the adsorption of Mo strongly depends on pH. The most effective adsorption was observed at pH values below 7. Experiments on adsorbent regeneration showed that Mo(VI) can be effectively desorbed from the aluminum oxide surface into a phosphate solution in a wide range of pH values. After the desorption of Mo(VI) in a phosphate solution, alumina was found to be suitable for repeating the procedure at least five times.
Библиографическая ссылка: Kurmysheva A.Y. , Vedenyapina M.D. , Kulaishin S.A. , Podrabinnik P. , Pinargote N.W.S. , Smirnov A. , Metel A.S. , Bartolomé J.F. , Grigoriev S.N.
Adsorption Removal of Mo(VI) from an Aqueous Solution by Alumina with the Subsequent Regeneration of the Adsorbent
International Journal of Molecular Sciences. 2023. V.24. N10. 8700 . DOI: 10.3390/ijms24108700 WOS Scopus OpenAlex
Идентификаторы БД:
Web of science: WOS:000996813700001
Scopus: 2-s2.0-85160374206
OpenAlex: W4376275015
Цитирование в БД:
БД Цитирований
OpenAlex 24
Scopus 22
Web of science 22
Альметрики: